Due to a technical problem, our website is only available to a limited extent. This also affects our download service area. We are already working on the solution and ask for your understanding.
Frequency divider
FT 1D-1D
|
|
Frequency divider for error-free division of frequencies / pulses.
The FT frequency divider is used for error-free division of frequencies or pulses from conventional encoders, sensors, or other incremental measuring systems. Four easily-accessible DIL switches can be usedto program division ratios from 1:1 to 1:4096 as well as the desired display of the direction of rotation. A separately adjustable divider is available for the zero signal.
The module is quickly and easily mounted in the control cabinet on a standard DIN rail.
| Mechanical | |
|---|---|
| Dimension | 40 mm x 79 mm x 91 mm |
| Working temperature | 0 °C ... 45 °C |
| Protection level |
IP20 |
| Connection types |
Screw terminals Sub-D connector |
| Electrical | |
|---|---|
| Input interfaces |
HTL TTL / RS422 |
| Output interfaces |
HTL TTL / RS422 |
| Inputs coding |
A, B, 0 A, A|, B, B|, 0, 0| |
| Outputs coding |
A, B, 0 A, A|, B, B|, 0, 0| |
| Input frequency | 300.000 Hz |
| Output frequency | 300.000 Hz |
| Power supply |
18...30 V DC |
Features
Benefit
- Level conversion from HTL single ended, RS422 to HTL differential and vice-versa.
- Limit frequency 1 MHz
- Division of double-track (A, B, 90°) pulses with adjustable ratio from 1 : 1 to 1 : 4096.
- Division of the Z pulse with adjustable ratio from 1 : 1 to 1 : 256.
- Push-pull outputs for direct PLC control.
- External input for zeroing the A/B/Z divider (defined start / stop).
- Independent second Z divider adjustable.
- Z pulse division ratio adjustable.
Benefit
- Frequency reduction for slow controls.
- External scaling for controls.
- Active signal adaptation for High/Low level.
- Adjustable zero pulse for specific applications
