Due to a technical problem, our website is only available to a limited extent. This also affects our download service area. We are already working on the solution and ask for your understanding.
Process controllers for standard signals electronic
Codix 565
|
|
Process controller with totalizer function.
The Codix 565 process control unit with totalizer function displays measured values of V and mA standard signals in high resolution and monitors and controls 2 limit values.These fast displays set new standards in user-friendliness. Thanks to an easy-to-read 14-segment LED display, comprehensible scroll help texts and a practical short instruction card, the annoying reading of extensive instructions is no longer necessary.
Optionally also with analog output.
| Mechanical | |
|---|---|
| Model | electronic |
| Functions |
Standard signal measuring devices Process displays for standard signals |
| Dimension 1 |
96 x 48 mm | 92 x 45 mm |
| Protection level |
IP65 |
| Working temperature | -25 °C ... +75 °C |
| Weight | 180 g |
(1) Front panel size | Panel cut-out
| Electrical | |
|---|---|
| Power supply |
100...240 (± 10%) V AC 10...30 V DC |
| Signal input |
Analog ±10 V Analog 0...10 V Analog 0...20 mA Analog 2...10 V Analog 4–20 mA |
| Signal output |
Analog 0...10 V Analog 0...20 mA Analog 2...10 V Analog 4–20 mA 2 x Relais |
User-friendly
Powerful
- Practical short instruction card for parameterization and operation of the device
- Help texts as ticker
- Easy-to-read 14-segment LED display, 6-digit, 14 mm high
- Simple programming with 4 front keys
- One front key and 2 additional inputs can be programmed for specific applications
- Customer-specific characteristic curve via 12 interpolation points for all measuring signal inputs
- Min/max memory individually resettable
Powerful
- Measuring rate of 10 measurements/second
- Time-controlled totalizer function for adding up measured values, can be reset separately
- 2 relay outputs (change-over contacts) for limit monitoring with hysteresis and on/off delay function for current measurement or totalizer values
- Analog output for current measured value, min. value, max. value or totalizer value
- Sensor power supply 15 V DC / 25 mA, also for
- Wire transmitters
- Inputs and outputs electrically isolated
- First-order digital filter for smoothing display fluctuations with unstable input signals
- Tare function
Accessories
Mounting frame, 48x96
For the installation of all devices with DIN dimensions 48x96mm. For mounting the devices on a DIN rail.| G.300.005 |
